All are capable of delivering a race-inspired exhaust note along with more power and torque. And this is why cat-back exhaust systems are considered to be one of the best performance modifications that are rewarding in power and sound and are highly effective for all driving purposes. Aside from maximizing your sound gains, the RSC® technology in every CORSA high-performance exhaust allows for a completely free-flowing air path to optimize your performance with every drive.

And a lot of people think that gearheads mess with it just to make our cars sound louder. Another problem is that the gaskets and seals can degrade over time, resulting in leaks. These leaks can usually be fixed by replacing the relevant seals and gaskets.

Although phosphorus is no longer used in gasoline, it (and zinc, another low-level catalyst contaminant) was widely used in engine oil antiwear additives such as zinc dithiophosphate (ZDDP). Beginning in 2004 duramax egr delete kit, a limit of phosphorus concentration in engine oils was adopted in the API SM and ILSAC GF-4 specifications. Although catalytic converters are most commonly applied to exhaust systems in automobiles, they are also used on electrical generators, forklifts, mining equipment, trucks, buses, locomotives, motorcycles, and on ships. They are even used on some wood stoves to control emissions.[5] This is usually in response to government regulation, either through environmental regulation or through health and safety regulations. Custom setups, especially for vehicles that do a lot of off-roading are also available.

By running pipes from the catalytic converter to the muffler and from the muffler to the exhaust tip, cat back exhaust systems improve exhaust gas flow, providing small performance boosts. However, your performance gains may be limited if your catalytic converter restricts gas flow, as a catback exhaust system is installed ‘downstream’ of the converter. Header-back systems are increasingly rare, namely because of modern emissions systems. Since removing your vehicle’s factory emissions components is highly illegal, the previous two options are more common. However, header-back systems are still available for some older, pre-emissions applications. In these cases, header-back systems offer more performance and volume than cat-back or axle-back systems; however, they’re also the most expensive and the most challenging to install.

The first widespread introduction of catalytic converters was in the United States automobile market. The exhaust system is crucial to a car’s performance, especially the catalytic converter which can go bad if it’s overworked. A stock exhaust system strives to minimize the car’s materials while maximizing space. This means that the exhaust system’s performance can suffer, having to work harder with less horsepower.

Video Features Options Short video of our 3" Catback Exhaust for the 07+ Honda Civic Si Sedan. Note that this was installed on a naturally aspirated setup (stock header and... Already own an Ultimate Racing Performance Muffler and want to upgrade to a full Catback system. For information about our other auto repair services, please refer to our comprehensive guide. But both cons of a resonator are not present with a cat-back exhaust system. For the noises that the muffler fails to get rid of, the resonator eliminates them. As a result, they are fitted with both a muffler and a resonator.

Installation was easy, and the craftsmanship and welds are very high quality. Mishimoto exhausts are constructed of large diameter mandrel-bent pipes for maximum flow. Mishimoto exhausts are perfectly engineered to provide an aggressively rich tone with no annoying highway drone. In general, though, you can expect to pay anywhere from $1000 upwards for a good cat back exhaust system. That may seem like a lot of money, but keep in mind that a cat back exhaust can provide a significant boost to your car's performance and help it to stand out from the crowd. Typically a cat-back exhaust upgrade can be swapped with the original exhaust without any modifications.

The remaining waves produce the deepened and enriched exhaust acoustics you love. Stillen offers a variety of exhaust systems for many vehicles, both foreign and domestic. The muffler is a glass filled, large chamber design that provides the optimal amount of exhaust velocity for the engine while producing a great low rumble sound - without any annoying buzzing, "racer" sound. The high clearance fitment dramatically reduces the risk of getting hung-up on obstacles when off-roading. We’ve been helping customers with performance upgrades since 2006, and have a staff full of people who can help answer your questions. Our customer service — from our low prices to our fast shipping — has earned us a reputation with a legion of fans.

That means a full exhaust system is a one-way ticket to overtaking cars on the road with ease, fewer trips to the gas station and more power behind your acceleration for when you need it the most. Discover the true power a high-performance exhaust system can bring to your truck or car with CORSA PERFORMANCE. CORSA has remained a leader in aftermarket performance exhaust systems through advanced engineering and constant innovation for over 25 years. Each CORSA exhaust utilizes our patented Reflective Sound Cancellation® (RSC®) Technology and top-of-the-line materials for a truly aggressive sound without any annoying drone during cruise. Enhance your driving experience and see what sets us apart from the competition with a CORSA axle-back or cat-back exhaust system today. Adding a cat back exhaust system is a great way to increase horsepower and improve sound for your vehicle.

You’ll save right away when you add a front-pipe and a downpipe to your base system over buying each of these individually. Many car fanatics love a unique sound for their ride, almost similar to a racecar. It’s no secret that the standard vehicle exhaust system won’t produce a roaring or distinguishable sound. This is where a back cat exhaust system will be favorable to any motorist. The upgraded system will give you a more enjoyable, louder ride. But this is where certain systems will do better than others, so be sure to look into which one will be right for you.

In California, it is illegal to select a catalytic converter for installation based solely on vehicle weight and engine size. The design of these systems often sees an increase in horsepower compared to the factory design of a vehicle. Because stock models try to minimise materials and maximise space, with horsepower as a lower priority.

Installation was super easy, and did it myself with only ramps. When IE claims 'no-drone' they really mean it - the sound is perfect! The youtube videos do not do a good job capturing the sound quality, but trust me, it's the best overall setup for your car at a reasonable price point. Enjoy a tuned and enjoyable exhaust note without any raspy leaks ruining the show. Our exhaust system assembles with our wide-width stretch clamps designed to seal and pull your exhaust connections together.

We use the latest, advanced equipment to ensure precise and accurate adjustments. Each of the trucks will be included in Shelby's official registry. Revology's '68 Shelby GT500KR surpasses the performance of the original with a 710hp supercharged Ford/Roush Performance 5.0L Ti-VCT Coyote DOHC V8 engine. In 1962 Carroll Shelby, one of America's greatest race car drivers began a new chapter in his storied career with the legendary Cobra sports car. A piece of of this sports car's "DNA" is part of every subsequent Shelby vehicle.

We develop solutions to common issues that still trip up our competitors. For instance, we recently upgraded our Ford Maverick exhaust system offerings to include AWD and FWD configurations. President and founder, Gale Banks, began at age 14 with an engine teardown of his mother's '31 Ford Model A that resulted in an increase of 65 hp for a total of 105 hp.

And for early access to special offers on the products you love, add Banks Special Offers. In a world of companies making disparate parts, Banks engineers the entire engine, not just its components. The proof of Banks’ expertise is its list of national championships and world records as well as the biggest military engine contract of the century. Of all the possible options, the U.S. military chose the Banks D866T engine for its high performance and durability.

However, it’s always a good idea to consult with professional mechanics like the crew at Bradley’s Auto Service to make sure everything checks out. As a vital touch point to the driving experience there is something truly special about dropping a gear and hearing the roar as you disappear. We fear most the time when we are enveloped in silence in our electric bubbles. Our mission forever more is to push off that date and engineer, design, and manufacture the world’s greatest exhaust systems, so that you will always be able to enjoy your car to the fullest.

When the exhaust mode is placed in "Sport" mode the exhaust system broadcasts an "Xtreme" level sound 6 decibels louder than the stock exhaust system. As the driver adjusts the exhaust mode to the "Normal" level, the exhaust produces an exhaust note more closely resembling a CORSA "Sport" level exhaust note. At Mishimoto we offer a variety of products such as intercoolers, catch cans, cold air intakes and more. Trust in Mishimoto's expertise and commitment to quality to deliver exceptional products for all your automotive needs. Mishimoto exhaust systems utilize high-flow mufflers for minimal flow restriction.

Since 2003, we have specialized in building BMW M-models (and Tesla) with a refined selection of industry-leading, high quality products. Our 8,000 sq/ft installation facility and shipping headquarters is located in Anaheim, California. IE's advanced DroneTrap technology captures the pulse waves responsible for your B9 3.0T engine's exhaust note and draws them into dual mathematically tuned resonators. The internal ports are engineered to resonate these waves against each other in a process that selectively cancels out those responsible for annoying drones.

This quality material will ensure that your Cat-Back system will last through any harsh conditions. A cat back exhaust system is a form of car exhaust that includes the catalytic converter. This type of system is often used by those who want to improve their car's performance, as it can help to increase power and efficiency.

Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. RES is but one of many great vendors of parts for your car’s exhaust system. Entice customers to sign up for your mailing list with discounts or exclusive offers. I watched a ton of videos and finally found one from Edge Autosport that went through 6 different variations of ETS setups.

Automotive Performance Systems Inc. (APS) and its NEUSPEED®‚ and Neumann Distributing divisions are your number one source for aftermarket import performance products! We carry a large inventory of all the parts featured in our catalog and on our website. Our customer service is unrivaled, with the most knowledgeable support team in the industry. All aFe exhaust systems are engineered and manufactured in our Corona, California facility. The price of a cat back exhaust system can vary widely depending on the make and model of your vehicle, the materials used, and the complexity of the design.

There is a range of muffler types you can choose from with a cat back exhaust system with most people opting for a glasspack or straight-through muffler. Both of these options are designed to work well within the system to reduce back pressure. Deciding to purchase a performance exhaust system for your car is no easy task.

Advanced 3D scanning tools and cutting-edge software provide our engineers with a high-resolution digital model of the Audi B9 S4 chassis. This data is then used to maximize the exhaust size for flow and optimize all available space for the perfect catback fitment. CORSA branded exhaust systems are backed by a Limited Lifetime warranty for as long as you own your vehicle with proof of purchase. The new exhaust sounds perfect, a marked improvement over stock. It is not too loud - I use the car as a daily driver and drive in capital beltway traffic.

CORSA does not recommend or recognize purchases and installations on unspecified vehicles. ARK Performance is a leading manufacture that develops the best cat back exhaust systems, downpipes, test pipes, and hi-flow cats for all car enthusiasts. Using custom designed straight through mufflers for flow - without the noise level of a track car. From a company that’s as committed to your satisfaction as to sonic excellence. A catback exhaust system is a great way to improve the sound, performance, and emissions of your vehicle. If you are looking for a way to improve your vehicle, a catback exhaust system is a great option.

It typically includes a rear pipe, resonator, and muffler that all attach after the last catalytic converter. The turbo-back system is the most complete system you can buy. It replaces all of the components that the previous two systems that we’ve talked about and also upgrades the downpipe. The downpipe is the first piece of exhaust piping that comes after the turbocharger and it also houses the catalytic converters on all L15 powered 1.5T Civics and Integras. From a sound and performance perspective, you’re going to get the most of both compared to the other two versions mentioned before.

You get the only the best with SPD's 3" resonator delete pipes. These aluminized steel pipes are 3" .. SPD's high performance resonator cat-back pipe replaces your factory resonator pipe with a true 3" p.. The welds and craftsmanship are top notch, and the tips look perfect.

Typically, that includes a mid-pipe, muffler, tailpipe and tips. Cat-backs generally yield increases in performance, due to the more efficient flow of exhaust through upgraded parts like larger diameter tubing and better flowing mufflers, as well as improved sound and reduced weight. For starters, the "cat" in catback exhaust system is short for "catalytic converter", a central part of your car’s emission control system, which cat back exhausts are fitted behind, hence the "back". This relatively simple mod helps to free up exhaust gas flow and improve the noise of your engine by swapping out part of your exhaust system with a specially designed car performance exhaust system. These three reactions occur most efficiently when the catalytic converter receives exhaust from an engine running slightly above the stoichiometric point. For gasoline combustion, this ratio is between 14.6 and 14.8 parts air to one part fuel, by weight.

We match the exit size to the size exhaust you ordered, so if you are ordering this after the fact, please include the exhaust size you have in your order. Replaces the OEM catalytic converter with a free flowing pipe. Completely straight through (no bottleneck), free flowing mini-muffler and pipe. Replaces the OEM catalytic converter with a 3" metal substrate core high-flow performance cat and our mini muffler. The metal core is our highest flowing cat available and it will reduce... Rae is a very small 1000sqft shop, run by a dedicated team of two. Our motto, "Quality over quantity," drives everything we do and ensures the highest standards in every order.

The new Large Bore-HD exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4" stainless steel tubing for maximum flow, increased horsepower, increased torque and lower EGT's. This system is available in 4" cat-back with muffler. Large Bore-HD exhaust systems are the perfect combination of performance, fit and value. For over 40 years, MagnaFlow has maintained its position at the forefront of high-end catalytic converter and performance exhaust manufacturing. MagnaFlow stands by its products with industry-leading warranties in service of its mission to provide the highest quality exhaust experience from start to finish.

From cat-back exhaust systems, emissions compliant catalytic converters, performance mufflers to custom exhaust parts, buy the automotive part your vehicle needs. In addition to boosting your horsepower, cat-back exhausts can make a massive difference to the sound of your car, especially if you choose exhaust tips designed for acoustics. Basically, catback exhaust systems upgrade regular exhausts, improving the flow of exhaust gases and the performance of your engine with wider pipes and smoother bends.

The amount of horsepower gained from installing a cat-back exhaust system varies by vehicle and the system’s design. However, when combined with other performance enhancements, the gains can be more significant. The primary goal of a cat-back exhaust is to reduce back pressure, allowing your engine to breathe better and operate more efficiently. The factory exhausts come in mandrel bent tubes made of stainless steel or aluminized steel. Besides offering longer durability, the construction also ensures there’s free flow of gases. To improve this, you can opt to replace some parts of the exhaust system using aftermarket performance exhaust systems.

Decades later, Gale and the team are not only innovating, patenting products, and setting the bar for aftermarket performance manufacturers, we're also sharing our secrets with the world. The 6.2-liter LS3 V8 was factory rated at 415 horsepower and 415 lb-ft of torque. It is used to expel harmful gases and substances from your engine; without it, the car could experience a build-up of fumes.

Glasspack mufflers do not have extra sound-absorbing material. So, in order to absorb sound, they use the glass layer and packing. But if you are making your order on partcatalog.com, you can always inquire about the recommended tube diameter for your exhaust system by providing your make and model. This can lead to a significant decrease in torque and horsepower as well as rpm.

I do live in a residential community and want to keep things civil with my neighbors...so I went with the resonated/muffled setup. Orders of $299.99 or more ship free within the continental U.S.Shipping to Alaska and Hawaii is additional and not included.We do not ship international at this time. Enter your email address above, to be notified of new products released. Sign up to our newsletter and stay up to date on all the latest news, products and events.

The only difference is that it features straight perforated pipes. The original exhaust systems focus more on just reducing the sound and not shaping it to give it that desired deep growl. One function shared with both the axle-back and the cat-back exhaust systems are shaping your vehicle’s tone.

A stock system is designed to reduce and if possible eliminate all the noise produced by your vehicle. Because of this, the axle-back exhaust system does not impact the flow or pressure of the exhaust gases in any way. The axle-back exhaust system uses the factory exhaust pipe which does not have a large diameter. This offers even more breathing space for the engine thus better performance. Most cat-back exhaust systems are customized and not universal. One is to replace specific parts like with cat-back exhaust systems.

Our exhaust system uses larger piping compared to the factory exhaust system, yet weights 5 lbs. The factory system uses 2.56" piping, which reduces to 2.36" before splitting, greatly diminishing the overall diameter of the system. Finally, our system’s 4" exhaust tips dwarf the factory 3.15" tips, giving the rear of the vehicle a sportier look. Beautifully hand-crafted T304-stainless-steel components adorn the system with stunning TIG-welding throughout.

Shelby also gives the truck some off-road chops by installing a BDS 3.0-inch lift kit, Fox 2.5-inch internal bypass dampers, and performance rear traction bars. The truck also sits on a set of 22-inch Shelby wheels wrapped in 35-inch all-terrain tires. The new 2024 Ford Shelby F-150 packs up to 785 hp, or more power than many supercars. That's with an available supercharger for the truck's 5.0-liter V-8. Buyers can also opt for a naturally aspirated version where the V-8 keeps its stock 400-hp rating.

Shopping for exhaust can be intimidating, from figuring out your end goal -- sound or power increase -- to determining the exhaust type you need to achieve it. In this article, we'll focus on cat-back exhaust and explain what it means, what's included, and why you'd want it for your truck. All 2000 model year and earlier vehicles or any model year vehicle that was manufactured with EPA or Federal emissions non 50-State certification. All 2001 model year and newer vehicles that were manufactured with California or 50-State emissions certification. Our ASE Certified technicians are the best when it comes to the installation of Banks performance products. The 19″ Y-spoke alloy wheels were sourced from a Cadillac CTS-V and are mounted with Continental ExtremeContact tires.

Check out our cat back exhaust category and you’ll find systems that are built from stainless or aluminized steel. They also come in different tubing diameters to deliver varying ranges of exhaust volumes. Some of our exhaust kits even come with resilient powder coatings, so you can get an upgrade that matches your Charger’s appearance. Thanks to the large selection of products at AmericanMuscle, you can definitely purchase a cat back exhaust that can bring out your vehicle’s true high-performance potential.

This is the 3rd Gen Toyota Tundra Borla S-Type Cat Back Exhast with Chrome Dual Tips. Borla manufacturers some of the best Toyota Exhaust systems, and this S-Type 2022+ Tundra Exhaust is no different, featuring the Merge X-Pipe for increased performance adn improved sound. The Carven-R series Performance Muffler delivers an aggressive sound with a refined tone. This unique pack-less (Patent# D802,507) muffler design is one of its kind. Stand out from the crowd with a performance exhaust system that sounds great. Save big on that signature MBRP sound during Pick Up Your Sound.

Fine-tune your ride for the best performance and aesthetic today. Steeda offers the largest complete line of Ford-based parts and accessories for your build and is considered the largest privately owned Ford performance-based operation in the world. If you've been searching for the perfect place to purchase Ford automotive performance parts for your vehicle, then you're at the right place!

To maintain catalyst efficiency, the air–fuel ratio must stay close to stoichiometric and not remain rich or lean for too long. All of Milltek's performance exhaust systems are manufactured from T304L stainless-steel; giving you the satisfaction of knowing that Milltek's products are meant to last within some of the toughest environments. T304L is a highly durable form of stainless-steel that is far less susceptible to degradation and discolouration than many others of its kind, while it will last almost indefinitely. If you are looking for something a little more unique, you can opt for a split rear or custom cat back exhaust system design. The split models feature an exhaust pipe that, as the name suggests, splits into two side-by-side pipes at the end, often with polished muffler and exhaust tips to really make a visual impact. The wider pipes of a cat back exhaust system mean that your vehicle is able to breathe better.

Or are you a more relaxed driver who takes the roads less travelled? Knowing your driving style will help you pick a cat back that not only sounds good but also performs well. Lastly, you need to decide what material you want your cat back to be made out of. If you're looking for a way to enhance your car's performance and style, a cat back exhaust may be the perfect solution. All 1993, 1994, 1996 and newer vehicles that were manufactured with California or 50-State emissions certification.

It's more than our precision-fit or full engine-to-tailpipe product offering, Walker sets the standards. From mild rumble to wild roar, upgrading your exhaust will improve the sound of your truck and help it to stand out from the pack. This direct-fit SPEQ Series system bolts on to your Tacoma easily thanks to the extensive use of 3D scanning during development to ensure OEM-like fitment.

Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. With additional power from idle to redline, we’ve carefully tuned this bad boy to free up power without the annoying drone that often comes in V6 exhaust. Explore further with higher exhaust clearance and experience the sound of adventure.

The buyer is solely responsible for obtaining the permissions where applicable required by the applicable law for the intended purposes/usage. In no event a whatsoever claim shall be constituted by the buyer against REMUS and its affiliates arising from or in connection with required approvals for public road usage. Take your stock or modified Colorado/Canyon to the next level with a Mallett Performance Cars exhaust system today.

This style of clamp design is popular in high-end OE applications and is known for long-term reliability. You can change the look of your Jeep too, with everything from polished stainless steel to full black exhaust kits, you can pick just the right look for your jeep. Depending on the year of your Jeep you might even be able to get a single or dual exit exhaust. You can choose your favorite exhaust system from our three collections, the GRiP Exhaust, N-II Exhaust, or the DT-S Exhaust.

Cat-back exhaust systems will include any pipes that run from the catalytic converter to the muffler, the muffler itself, any pipes that may run from the muffler to the exhaust tips, and the exhaust tips themselves. Some cat-back exhaust systems have a muffler delete, which means no muffler is included. This is typically found on vehicles that function primarily for off-road use; it's not standard on daily driver vehicles and is even illegal in some states.

All performance exhaust systems are designed with you in mind, and we cater to an ever-expanding range of vehicles. Milltek believes in continuous evolution, and their research & development team work throughout the year to deliver the most in demand solutions to all your performance exhaust requirements. All products are made in the UK and distributed to more than 90 countries worldwide, making Milltek Sport one of the most accessible performance aftermarket brands on the market. If you're looking to customize your vehicle's exhaust system, Mishimoto also offers a range of aftermarket exhaust options. These exhaust systems are designed for specific vehicle models and provide a combination of performance, sound, and visual enhancements.

These look like standard mufflers with a VERY unusual side entry rear exit configuration. Notice the heat discoloration at the intersection where the split occurs.Heat discoloration shows up where there is a flow restriction. Notice also the heat discoloration just after the pipes enter the silencers. It is AMAZING the engine makes the power it does through this congestion. Features Only 10 lbs [catless and non resonated version] 304 stainless steel piping Smooth air flow for maximum horsepower Compatible with both manual and automatic transmissions TIG welded to perfection... The main functions of exhaust systems are increasing horsepower and improving your engine sound.

They both improve your engine’s tone and give it that deep rumble loved by every motor enthusiast. Getting a cat-back exhaust system is definitely the more budget-friendly option. Other benefits of aluminized steel is they are lightweight and very workable.

If you have modified your 4×4 with lifted, lowered, or air type suspension systems, you can opt for a specially designed cat-back system with more pipe curvature before the rear axle. This is necessary for off-roading as it allows a higher degree of wheel travel and greater clearance for reduced-height springs and airbag suspensions. The custom exhaust systems available let you pick from a selection of pipework that allows you to adjust the exhaust to suit your noise preference. Are you looking to boost the power and efficiency of your vehicle?

A spare set of 19″ Y-spoke alloy wheels is included in the sale, and they are shod with Bridgestone tires. The car is finished in Panther Black Metallic (80U) and features a GXP-specific front bumper cover and rear diffuser as well as a sunroof, fog lights, dual hood scoops, fender vents, and a rear spoiler. Imperfections are noted on the decklid and on a door and are also shown in the gallery. Our expansive inventory of Subaru performance parts ensures your vehicle not only performs at its peak but is also supported by our unparalleled customer service. At SubiSpeed, we understand that upgrading your Subaru is not just about selecting the right parts; it's about having a trusted partner every step of the way.

This is achieved by burning off the excess hydrocarbons which result from the extra-rich mixture required for a cold start. Slightly lean of stoichiometric, the exhaust gases from the engine contain excess oxygen, the production of NOx by the engine increases, and the efficiency of the catalyst at reducing NOx falls off rapidly. However, the conversion of HC and CO is very efficient due to the available oxygen, oxidizing to H2O and CO2. However, the efficiency of the catalyst at reducing NOx is good, and the production of NOx by the engine decreases.

Combined with our five different tip options, we've got you covered. We’ve had decades of experience perfecting exhaust style and technology and have developed custom exhaust systems considered too ‘niche’ by competitors. Many exhaust manufacturers use 400 series stainless steel to reduce costs and pad their profits. Additionally, the Maverick systems by Thermal offer a range of upgraded tip options that owners can choose from or change over time. Getting an upgraded cat-back exhaust system for your truck can enhance your performance and produce a great sound. Then there’s poor fitment and the dreaded drone that all too often accompanies aftermarket exhausts.

Exhaust systems are integral to your ride’s performance; these amalgamations of piping, mufflers, and resonators carry exhaust gasses from your vehicle’s exhaust manifolds to the tailpipe. Dual muffler section upgrade designed to bolt up to the OEM midpipe   Features Bolts on to factory midpipe! 3-inch 304 stainless steel piping Dual high-flow mufflers with straight through... Reducing back pressure is the key to improving performance with a cat-back exhaust system. By allowing exhaust gases to exit the engine and flow through the system more freely, the engine runs more efficiently. This efficiency can translate to better throttle response, increased horsepower, and even improved fuel economy in some cases.

Once we receive and evaluate your OEM catalytic converter, refunds will be issued in the form of a MagnaFlow Visa® Prepaid Card valued up to $75. A Recycling for Refunds icon will appear in your cart to get the process started. Sign up for our newsletter to be the first to know about our latest products, offers and events at MagnaFlow.

From Overland Series to our all-new SPEQ Series, explore MagnaFlow's latest performance exhaust systems designed for the 2024 Toyota Tacoma. Aftermarket cat-back exhaust upgrades are a relatively simple way to increase your vehicle’s power. Typically these upgrades involve installing wider piping with fewer sharp or sudden bends as a way to reduce backpressure. Backpressure is pressure opposing the desired flow of exhaust gasses. The more you are able to reduce backpressure, the more efficient the system will be, and ultimately your horsepower will increase. Cat-back exhaust refers to any part of the exhaust system that’s behind the catalytic converter.

As an added bonus, cat-back systems include all of the necessary parts to replace your existing exhaust. The only costs you need to worry about are the kit itself and installation. Installing one of our cat-back exhaust systems is one of the best upgrades you can do on your Ford Maverick. Cat-back exhaust refers to what's in "back" of the "cat," or catalytic converter. It refers to the components that run from the rear outlet of the catalytic converter all the way back to the exhaust tip.

If you've got questions about cat-back exhaust systems, pipe diameters, muffler type, or anything else, talk with our product specialists. All 1995 model year vehicles, and all 1992 model year or earlier vehicles. All model year vehicles that were manufactured with EPA or Federal emissions certification. Exhaust gases from the cylinders are collected in the exhaust system to prevent harmful fumes from entering the vehicle.

Exhaust systems also play a role in reducing noise levels, improving engine performance and reducing fuel consumption. To get the power level up to 785 hp, Shelby installs a Ford Performance supercharger, as well as a new carbon-fiber air intake tube, high-performance fuel injectors, and an aluminum heat exchanger. A Borla (cat-back) exhaust system rounds out the list of powertrain modifications.

Explore renowned manufacturers such as Borla, Invidia, and HKS, known for their exceptional craftsmanship and exhaust system expertise. FTSpeed's cat back exhausts are designed to perfectly fit your sports car, delivering noticeable gains in both power and aesthetics. Elevate your vehicle's performance and sound with our premium cat back exhaust systems. Cat-back exhaust systems typically feature a muffler, and sometimes not, and these will have piping that will route to your catalytic converter. The piping will have larger bends that are as straight as possible to provide an unobstructed exit path for the exhaust gases.

Follow us on Facebook, Instagram, YouTube and Twitter to stay up to date on our latest products, projects, and adventures. Join the conversation and show off your ride with #MagnaFlow for a chance to be featured. Overall, cat back systems are relatively low-maintenance and easy to keep in good working order. There are a few common problems that can occur with cat back systems, but fortunately, they are relatively easy to fix.

Straight-through, or flow-through, mufflers have perforated baffles and packing material that provides a conservative level of sound absorption while still keeping sound output moderately loud. Glasspack mufflers perform similar to resonators due to their design and lack of sound-absorbing packing material, so they tend to be louder and higher pitched. For compression-ignition (i.e., diesel) engines, the most commonly used catalytic converter is the diesel oxidation catalyst (DOC). This catalyst converts particulate matter (PM), hydrocarbons, and carbon monoxide to carbon dioxide and water. These converters often operate at 90 percent efficiency, virtually eliminating diesel odor and helping reduce visible particulates. These catalysts are ineffective for NOx, so NOx emissions from diesel engines are controlled by exhaust gas recirculation (2017 ram 3500 egr delete kit).

In addition, a cat-back exhaust can also improve your car's fuel economy. So, if you're looking for a way to get more out of your car, a cat-back exhaust is a great option. We now offer Maverick cat-back exhausts in both all-wheel drive (AWD) and front-wheel drive (FWD) configurations.

It is important to note, however, that going too large may cause a dip in performance when gases pile up and exit the system slower resulting in torque, rpm, and horsepower loss. After the emissions are channeled out from the cylinders by the exhaust manifold, they are deposited into different catalytic converters. The IE Catback Exhaust System for your Audi B9/B9.5 S4 incorporates our in-house engineered DroneTrap technology to deliver a truly aggressive exhaust note without any annoying drone or rasp. Engineered with cutting-edge design features, including mandrel-bent stainless steel, TIG welding, multi-point reinforcements, and oversized quad tips. A catback exhaust system is a type of aftermarket exhaust system that replaces the muffler and tailpipe of a vehicle. It is called a "catback" system because it starts at the catalytic converter, which is located in the middle of the...

With over 66 years of breakthroughs and patents in high-performance gas and diesel engine development—including turbocharging and drivetrain, Banks has no rival. All Mishimoto products carry a Lifetime Warranty which includes accident protection. If you've installed any of our high quality products on your vehicle, please submit images of your ride/product to be featured on our social media accounts. Whether it’s wowing people at a show or getting every advantage over the competition on the track, our exhaust systems will help your car perform its best. They are usually the last systems to get addressed by performance drivers, who put a majority of work into turbo systems or custom tunes.

From the inception of the small block Cobra, Carroll Shelby intended to build a race version of his lightweight roadster; its ultimate iteration was the 289 FIA roadster. Special Edition Shelby F-150 Super Snake celebrates Carroll Shelby's passion for performance trucks. Shelby American is celebrating the 100th anniversary of Carroll Shelby's birth with a performance street truck to honor the ledged.

Because the engine won’t generate as much fumes and doesn’t need to work as hard to eliminate or minimize the fumes, your car will run better, saving you mileage. A benefit like this will improve the longevity of your car and even save you money at the gas pump. At Bradley’s Auto Service in Red Bank, NJ, we can build a completely custom exhaust system for your vehicle, including cat-backs. We will work with you to create your exhaust exactly the way you want it, with any combination of look, sound, feel, power, or muffler at your fingertips.

The performance parts available at Steeda include lowering springs, wheel spacers, spark plugs, brake kits, and many more. Choose from our Ford automotive parts today so that you can keep your ride in great condition. When it comes to picking a cat back exhaust system, you will likely be choosing between stainless or aluminized steel. The majority of the performance systems are made from stainless steel which is favoured as they won’t oxidize and corrode over time like traditional steel can.

Therefore, they are placed as close to the engine as possible, or one or more smaller catalytic converters (known as "pre-cats") are placed immediately after the exhaust manifold. Founded in 1988, Steeda is the leader in Ford performance products. We specialize in the engineering and manufacturing of parts for the Ford Mustang, Bronco, Bronco Sport, Explorer, Escape, Fusion, Focus, Fiesta, Ford Trucks, and more!

In this article, we are going to focus on cat back exhaust systems, and the main ten reasons that we have discovered as to why they are worth a look. If we know our car lovers, finding the right exhaust system for a car or truck is about getting more power without spending a fortune, and cat back exhaust systems tick a lot of boxes. Here is a pic of a converter and looking through the high flow core. Unleash the potential of your big displacement K motor with our high flowing 3" Header Downpipe.  This product eliminates BOTH OEM catalytic converters.  Available Catless or with a single High... We are proud to offer a wide range of completely custom, ready-built exhaust systems and parts at competitive prices with a lifetime guarantee. Contact Bradley’s Auto Service in Red Bank, NJ, today to get a quote for fitting, testing, and tuning your new exhaust system for maximum performance gains.

Cat-back exhaust systems replace all the components after the catalytic converter, sometimes referred to as the cat. Now you can upgrade your downpipe or mid-pipe depending on your applications. Some cat-back systems will include a mid-pipe depending on your cat layout. And when you want to make more power and take your vehicle to the next level, then you will be ready for an exhaust manifold. Available only from Mallett Performance Cars, this exhaust system is made from 304 stainless steel and features the highest quality mufflers and resonators.

#19680 includes all the hardware necessary for do-it-yourself installation. Extensive testing on our in-house dyno has been used to ensure this SPEQ Series truck exhaust system not only sounds impressive but also has the performance bite to match its newfound bark. Consent to receive text messages for these purposes is not a condition of any purchase, service, or sweepstakes entry. So, if you are okay with the sound and performance then you have no need to replace your original exhaust system. OEM exhaust systems on the other and have crush-bent tubing made of normal steel.

By freeing up the restrictions in the exhaust system, a cat back exhaust can help your engine to breathe more freely. This, in turn, can lead to a significant increase in horsepower. If you love cars just as much as we do, then you know that one of the best upgrades you can make to your vehicle is a cat back exhaust. But if you're not familiar with this term, don't worry – Vandemon Performance is here to break it down.

A faulty exhaust system can cause a decrease in power, acceleration and fuel efficiency, as well as potentially exposing drivers and passengers to harmful gases, so issues should be fixed immediately. We have a wide range of exhaust systems in stock – browse our range and find the correct exhaust system for your car below. There are many distinct and differentiable features to each of many cat back exhaust systems, meaning it’ll be easys to find a do-it-yourself cat back installation. The modifications directly bolt where the original exhaust is, so there won’t need to be excessive installation. You’ll have everything you need to replace the exhaust with the pipes, muffler, and tips that come with a DIY package.

Rattling or knocking noises from your vehicle are the most common signs that you need a new exhaust. Any rust on the exhaust can also be a sign that an upgrade is due. When you bid we pre-authorize your credit card for the service fee (this helps prevent fraud). If you win the auction, your card will be charged for the service fee and you pay the seller directly for the vehicle. If you don't win, your existing pre-authorization will be released.

The team at Sandgate Auto Electrics are well-versed in all things automotive which has led to them becoming the go-to for car lovers in the northern suburbs of Brisbane, South East Queensland. As a family owned and run company, who are local residents themselves, we have gotten to know their loyal clientele and love helping them with the repairs and modifications. Each "receiving" 50mm pipe is crushed in half, squeezed next to the other and welded to the 60mm "feed" pipe. We hope you enjoyed this lighter take from 27WON and find the information helpful the next time you shop for an exhaust system.

The difference in fuel economy is, however, more obvious while driving on a freeway. They also do not offer the best performance due to many reasons. If you're looking for an off-road exhaust with maximum clearance and an extremely&nbs.. Sign up for the IE mailing list and stay up to date on new products, sales, giveaways, and promotions.

This will improve the throttle response and acceleration in naturally-aspirated cars. The same reaction will be found in cars with forced induction with the addition of less turbo lag or supercharger response. Cat-Back exhaust systems are the most popular, coveted, and sought-after modification that enthusiasts will initially perform because of the main reason, and that is the sound. All of the brands we carry offer exhaust systems that are the result of decades of research and development.

Engines fitted with regulated 3-way catalytic converters are equipped with a computerized closed-loop feedback fuel injection system using one or more oxygen sensors (also known as Lambda Sonds or sensors). Other variants combined three-way converters with carburetors equipped with feedback mixture control were used. An unregulated three-way converter features the same chemical processes but without the oxygen sensor, which meant higher NOx emissions, particularly under partial loads. These were low-cost solutions, typically used for retrofitting to older cars or for smaller, cheaper cars. Axle-back exhaust systems replace only your vehicle’s rear exhaust section, usually consisting of items behind the rear axles, like rear exhaust pipes, muffler, and exhaust tips. A cat-back exhaust system will replace the components from the catalytic converter back.

Your engine’s performance and acceleration are then increased. The mandrel-bent tubing reduces the level of back pressure in the exhaust manifold as the larger diameter reduces restriction to the flow of exhausts. REMARK is an exhaust system manufacturer specializing in producing high quality, hand crafted exhaust components and systems for a range of vehicles. All products are made from 304L "Aircraft" Grade stainless steel. Milltek's 3.15" (80.00mm) Sport Catback Exhaust System has multiple tip options in Polished, Cerakoke Black, Brushed Titanium, Burnt Titanium and Carbon fiber. You get the only the best with SPD's 3" resonator delete pipes. These 304 stainless steel pipes are ..

Choose ARK and you will not be disappointed with the sound and quality of our products. Installing a catback exhaust system is a relatively easy task. However, it is important to follow the instructions that come with the system. If you are not comfortable installing the system yourself, you can take it to a qualified mechanic. Get an exclusive inside look at what we are doing on a daily basis with Banks’ Insider News.

Federal Catalytic Converters are not legal for sale, installation or use in the state of California. It should be noted that a split system will often provide an aggressive noise increase, and some designs will split the two pipes to opposite sides of the vehicle. If you are looking to save a little money but still get most of the benefits of a cat back exhaust system, however, 82-92 camaro headers aluminized steel may be the way to go. Made from traditional steel that’s been coated on all sides with aluminum-silicon alloy, these systems are very strong thanks to the metallurgical bond which still provides a level of corrosion resistance. While the aluminum coating reflects heat well, the steel can corrode if the aluminum layer is chipped or scraped off. Most cat-back systems will come in either an aluminized or stainless steel version.

Unlike your stock system, CORSA exhaust systems don't utilize performance-robbing restrictions that reduce airflow, such as chambered designs, baffles or spring-loaded valves. With wider tubing and our mandrel-bent design, your new full exhaust system will allow for reduced backpressure and provide cleaner oxygenized air to your engine. You'll see benefits like increased horsepower, torque boost and better fuel economy.